STANDARD
Boat built to the American Bureau of Shipping (ABS) standard.

HULL
The hull is constructed of E-glass and vinylester resin over a PVC core and bonded in the female mould, extra laminate in way of keel, mast and chainplates. Hull finished in white gelcoat. Waterline strip colour of choice.

DECK
The deck is built of a similar laminate as the hull of E-glass and polyester resin over a PVC core. Deck is reinforced in high load areas with extra laminate and high-density core. Gelcoat finish with one colour of choice including non-skid. Curved armour glass fitted to pilot house.

INTERNAL STRUCTURE
· All internal components to meet ABS requirements.
· Keel floors keelson and mast step.
· Two plywood bulkheads in bow section forward of mast.
· Two quarter frames and one ring frame in way of mast.
· Plywood frames to take floor boards in mast area.
· Chainplate and forestay attachments (carbon).
· Plywood frames at each end of raised floor with floor supplied.
· Three ring frames mid panel aft of mast.
· Bulkheads and two longitudinals for steering stations and seats.
· Gelcoated in bilge areas.
· Deck, hull and internal structure joined to ABS Standards.

FIXED KEEL
Steel can with top plate, which is sandblasted and epoxy treated. Lead bulb bolted to can. Keel is faired and painted with epoxy undercoat.

LIFTING KEEL OPTION
Steel can sandblasted and epoxy treated. Lead bulb bolted to can. Keel is faired and painted with epoxy undercoat. Keel casing of E-glass and plywood sandwich. Hydraulic ram in steel can with electric and manual pumps. Stainless steel pin to hold lifting keel in up position.

RUDDER
Built totally of glass laminate with epoxy resin in a female mould. Rudder shaft built with unidirectional Carbon. Faired and epoxy undercoated. Rudder bearings supplied.

ON DECK
· Self-draining anchor well with electric anchor windlass.
· Stainless steel stemhead fitting with roller.
· Stainless steel bow pulpit with navigation lights.
· (4) Stainless steel mooring cleats.
· Stainless steel stanchions.
· Double set of stainless steel lifelines.
· (2) Genoa sheet car and track.
· Mainsheet system mounted on pilothouse.
· (2) Lewmar self-tailing genoa sheet winches.
· (2) Lewmar self-tailing halyard winches.
· All halyards led aft to helmsman station with Lewmar jammers.
· (2) Leather covered wheels.
· (4) Winch handles.
· Aft lockers for gas tank and stowage.
· Emergency tiller.
· Stainless steel aft pulpits with aft opening lifelines and navigation light.
· Bathing platform.
· Stainless steel swimming ladder.
· Cockpit shower.
· Fuel and water fillers.

SPARS AND RIGGING
· Anodised aluminium 15/16 mast with two sets of aft swept spreaders.
· Mast step and mast collar with halyard turning sheaves.
· Anodised aluminium boom.
· Stainless steel standing rigging.
· Adjustable backstay bridle.
· Adjustable solid boom vang.
· Vectran mainsail halyard.
· Mainsail outhaul adjustment.
· One Reefing line.
· Genoa furling system.
· (2) genoa halyards. 1 masthead spin halyard
· Mainsheet and Genoa sheets.

SAILS
· Cruising mainsail
· Roller furling genoa

INTERIOR:

FORWARD CABIN
· Headroom 1.87m.
· Double berth 2m long with mattress.
· Hanging locker with door.
· (2) Dresser and shelf with wood trim.
· Lewmar 44 mid profile hatch.
· Lockable door.
· Storage under berth.
· Reading and ceiling lights.
· Teak and ash floorboards.
· Soft furnished roof lining

FORWARD HEAD
· Shower with tray.
· Marine toilet.
· Stainless steel wash basin with pressurised hot and cold water.
· Vanity with door, mirror above.
· Lewmar 20 low profile hatch.
· Sump pump for shower.
· Overhead light.
· Towel rails.
· Lockable door.

CABIN
· (2) Single berths 1.95m long with mattress.
· Teak and ash floorboards.
· (2)Reading lights.
· Wood trim.
· Lewmar 20 low profile hatch

GALLEY
· Stainless steel rectangular sink with pressurised hot and cold water.
· Gimbaled three burner gas stove with oven.
· Stowage under bench and sink.
· Cutlery drawer.
· Rubbish bin.
· 80L Refridgerator (12V/240V).
· Laminex bench top with wood trim.

PILOT HOUSE
· Headroom 1.9m.
· L shape settee with cushion and seat backs.
· Lockers behind and under settee.
· Chart table with chart light and instrument console.
· (2) Lewmar 40 low profile hatches.
· Dinette table with wood inlay and trim.
· Teak and ash floorboards.
· (4) Ceiling lights.
· Lockable door to cockpit.
· Engine compartment hatch.

AFT CABIN
· Locker with dresser.
· Double berth 2m long with mattress.
· Lockable door.
· Reading and overhead lights.
· Wood trim.
· Lewmar opening porthole to cockpit.
· Storage under berth.

AFT STORAGE
· (2) Cockpit floor hatch to storage.
· Cockpit seat hatch to storage.
· (2) light.

ELECTRICAL
· 12 volt system with large 80 amp alternator.
· 2 deep cycle batteries plus a battery for engine starting.
· 16 Function switch, circuit breaker panel.
· (3) 240 volt outlets for shore power.
· 240 volt water heater for shore power.
· Battery isolation switches.
· Anchor light
· Steaming deck light.
· Cockpit light.

ENGINE
· 39HP Yanmar 3JH3CE Saildrive engine.
· Folding two blade propeller.
· 160L and 80L stainless steel fuel tank (total 240L).
· Instrument panel and single lever engine control.
· Sound proofing in compartment.
· (2) light.

PLUMBING
· Electric bilge pump.
· Manual bilge pump.
· 150L and 240L stainless steel fresh water tanks (total 390L).
· 30L water heater on engine with 240 volt plug.
· Pressurised water system with expansion tank.
· Sea cocks on all skin fittings.

ELECTRONICS
· B&G h1000 (speed, depth, log).

EXTRAS INCLUDED
· (3) Fire extinguishers.
· Antifouling.
· Holding tank.
· Boom cover.